For parallelism measurement of rolls and other objects in numerous applications. The E970 is especially suitable when many objects are to be measured and aligned, and when the distances are long. Any chosen object or the baseline can be used as a reference. The prism is moved along the beam, which is deflected to each roll that is to be measured, and maybe aligned. Both ends of the roll are measured, and you get an angular value which is compared to the reference line (base line) or a reference roll. Besides paper machines, printing machines and rolling mills you can also measure and align rails, overhead tracks, metal sheet cutters and many other types of machines.
The E970 is especially suitable when many objects are to be measured and aligned, and when measuring over a long distance. The maximum distance with a standard system is 80 metres, the number of measurement objects can be several hundred, but is more likely limited by other practical factors than the system software! The alignment of the rolls can be performed in live mode with instant feedback. You can add, remove and remeasure objects any time during measurement. The result is displayed both graphically and digitally in a table, and a PDF report can be produced directly on-site. Then transfer the results to your PC and the data base software EasyLink™ (included). With a few accessories you can also do shaft alignment. This makes the E970 a very cost effective solution for your maintenance department.
SERVICE AND CARE
LUDECA, INC. is an authorized and certified repair and service center for EASY-LASER® products in North America. Please note that any attempt to service the components by unauthorized personnel will render all warranty coverage void.
Should a service of your EASY-LASER® instrument ever become necessary, we offer you a quick turnaround time, and if necessary a loaner system or component will be available to you (E-series only).
CALIBRATION
LUDECA, INC. is an authorized calibration facility for EASY-LASER® products in North America. We offer calibration inspections traceable to NIST (National Institute of Standards and Technology).
Our calibration service includes:
The calibration accuracy of EASY-LASER® systems should be checked every two years.