Roll Alignment with the Easy-Laser  E975

Laser alignment and parallelism measurement of rolls.

Measure level, straightness and flatness on wire sections plus flatness on bases and straightness on rolls.

The E975 is quick to set up on the

machine and can be used during short stoppages to check and if necessary

adjust or replace a roll. More advanced methods might require that the

measuring service is scheduled in advance and contracted personnel to be

used but with the Easy-Laser E975 you can do the job yourself.

Other methods such as measurement with prisms along the machine can take

significantly longer to prepare.   With the E975 you  have better

control over your machine time and increase productivity.

The E975 system consists of a laser

transmitter, a display unit with guiding software and a compact and neat

detector unit positioned on the roll. No stand is used to the side of

the machine, which eliminates the risk of the reference (laser beam)

being moved accidentally. No consideration need be taken of any machine

protection and frames on the side of the machine, since the laser

transmitter is positioned on the inside of the roll package. The

system's display unit produces a PDF report directly on site. The result

can also be transferred to PC.

The E975 is a cost efficient solution for

your investment and is quickly repaid through the reduced number of

unplanned operational stoppages and longer service lives for wear parts.

Maintenance departments and service firms can also extend the

measurement system to cover other alignment solutions in the

Easy-Laser-range.