The Turbine system comes in two versions. Easy-Laser® E960-A suitable for gas turbines and smaller steam turbines, and Easy-Laser® E960-B for larger turbines. The versatile design solves the straightness measurement problems quickly and with precision for any kind of application. Objects up to 40 m (132 feet) can be measured. The detector reads measurement values with a resolution of 0.001 mm (0.05 mils). EASY-LASER® E960-A AND EASY-LASER® E960-B The system comes in two versions.
Easy-Laser® E960-A has a measuring probe with a stroke of 10 mm. The slidable tube makes it possible to measure several positions in a row without moving the bracket. Suitable for gas turbines and smaller steam turbines. Easy-Laser® E960-B has a measuring probe with a stroke of 60 mm. This system is suitable for larger turbines. Software, laser transmitter and detector are common to the systems. The detector brackets differ. See system content further down the page.
The straightness programs of system E960 are very versatile, and let you work in the way that suits every job best. You can add, remove and remeasure measurement points at any time during the measurement. Up to 999 points can be handled by the program. You can include both full bores and half bores in any possible combination in one measurement, the program will calculate the correct centre line in all cases. The measurement program includes many different methods for straightness measurement: 1-point measurement, 4-point measurement, Multipoint measurement (also ovality measurement), 3-point measurement, 3-point measurement with arbitrary angles. Optionally a reference detector can be used to monitor the laser transmitter position at long distances.
THE MEASUREMENT RESULT
Thanks to the large colour display with clear graphs and measurement data you can evaluate the result directly on site. Any point can be set as reference and you can set an offset to which the centre line will be recalculated. You can also calculate waviness (short and long) and best-fit for the points. If you want, the result can also be checked against a tolerance value. The measurement system takes care of all these complicated calculations for you. Add, remove and remeasure measurement points Measures both full bores and half bores Multi-point measurement Bore ovality measurement Calculate waviness (short and long) and best-fit